Don't Settle for an Imitation — The Difference is Quality

Only Hi-Lift Jacks are made with a two-piece handle and socket design that is built for extended life. Cheaper imitations use a one-piece design that bends easily if lateral pressure is applied while lifting a load.

Our jacks are designed to help you survive in the most demanding situations – whether you are in the Moab desert canyons, the Welsh Mountains, the Amazon jungle, or the farmlands of Indiana. With a full-range of specially designed accessories, the Hi-Lift jack is just about the most versatile piece of off-roading/farm/auto recovery equipment you can buy.

When it's a heavy-duty situation, the tool had better be a Hi-Lift!

Hi-Lift Jack Specifications

• Approximate weight: 30lbs (14 kg)
• 4,660 lbs (2113.74 kg) rated capacity
• Tested capacity 7,000 lbs.
• Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
• Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
• Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1 5/16" diameter x 30" long.

Hi-Lift Jack Features

• Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching.
• Safety bolt is designed to shear at 7,000 lbs. (3175 kg)
• For speedy disengaging, lifting unit automatically drops away when load is removed.
• 4 1/2" (11cm) long lifting nose for positive contact with load.
• Steel bar can be reversed for extra long life.
• Low pickup of 4 1/2" (11cm).
  
• 28 square inch base plate.

Hi-Lift Jacks IN STOCK

36" cast/steel      $57.99

42" all cast          $64.99

48" cast steel       $69.99

60"  all cast             $79.99

Agriculture Grade  $69.99

Full-Sized Shovel Head, Sledge Hammer Head, Axe Head, Pick-axe Head with Telescoping Handle

A Handle-All is a multi-functional tool with telescoping handle and 4 full-sized implements. Compact and rugged, while maintaining full-size utility. Perfect for camping, off-roading, recreation, farming, ranching, and forestry. Stores compactly alongside other accessories.

When driving off-road, it is essential to have recovery equipment. Most reliable sources strongly suggest a Hi-Lift jack, a shovel, and an axe as minimal gear. In fact, many off-road parks consider these items mandatory equipment.

A compact set of tools ideal for off-road vehicles where storage space for supplies, equipment, and tools is limited.

Handle-All Features Include:

  Only $139.99 for the complete kit.

Trail Gear’s Hi-Lift Jack Mount is laser cut from 3/16” thick steel and then CNC formed. The ends of the mount are coped so that they can be welded to 1 3/4" tubing. We use a 1/2" thick bolt that has a precision hole drilled into it so that a hair-pin/cotter style pin can be
 inserted. This will keep the nut from rattling off and ensure that you never lose your hi-lift jack on the trail. We also added rubber pads that go between the jack and the mounts and a Velcro strap to hold the handle in place so that no vibration will be heard from any of the mounting locations. A second hole was placed on the mount so that you can put a padlock on the hi-lift to keep it totally secure from loss or theft.

Product is shipped unpainted, must be welded on.  Only $29.99 a pair.

The Hi-Lift 4XRAC is designed for serious off-roaders who are looking for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location.

• 1/8" steel construction holds up under the strain of off-road travel
• A padlock can be placed through a hole in the carriage bolt.
• All mounting hardware and instructions are included (some drilling required)
• Mounting brackets are slotted for adjustment.
• Velcro handle strap secures handle to jack bar.

4XRAC Features:

Each kit contains 2 mounting brackets, 2 mounting bracket caps, a Velcro strap for securing the Hi-Lift's handle and all necessary mounting hardware.  Only $39.99

Increase your support surface area and make the original power tool even more versatile!

• Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground.
• Convenient to use, easy to store.
• Rugged construction meets Hi-Lift Jack specifications for strength & durability.
• Can be used with ANY model of Hi-Lift Jack.

  Only $39.99

Eliminate Jack "Rattling" During Transportation and Storage

The rugged polyurethane Handle-Keeper holds the Hi-Lift® handle to the upright steel bar, keeping it in place when not in use and eliminating "rattling" during transportation and storage.

The Handle-Keeper easily slips on and off over the Hi-Lift® Top Clamp-Clevis to allow for proper use of the Hi-Lift® Jack. The unique design eliminates the need to remove the Top Clamp-Clevis for putting on or taking off the Handle-Keeper.

*NOTICE: IT IS VERY IMPORTANT FOR THE HANDLE-KEEPER TO BE REMOVED DURING JACK USE TO ALLOW THE HANDLE TO BE PLACED IN THE FULL UPRIGHT POSITION AS STATED IN THE HI-LIFT SAFETY INSTRUCTION MANUAL.

Handle-Keeper Features & Specifications:

• Fits all models of Hi-Lift® brand jacks
• Available in two colors - Black & Red

Only $15.99 each

Lift Directly from the Wheel - Plastic Bumpers and Extreme Lift-Kits Are No Longer a Problem.

Many trucks and SUV's have larger tires and/or lift kits that require extensive lifting height ability from the bumper jack. The Lift-Mate is designed to operate in a manner that allows the vehicle wheel to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar needed to lift the wheel in an adequate and safe height.

Lift-Mate Features & Specifications:

• Lift Capacity: 5000 lbs. (2273 kg)
• Rubber-Coated hooks to protect the wheel
• Rubber pad for protecting the tire and wheel

Only $36.99 each

Hi-Lift Jack Protector protects your Hi-Lift Jack from weather, mud, dirt and sand. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant.

• Fits 36", 42", 48" and 60" Hi-Lift Jacks.
• The Jack Protector WILL work with the 4XRAC and the LOC-RAC. (user will have to place holes in protector)
• Soft case easily stores.
• Draw string closure.
  

Note: All working parts of the 60" jack are protected. However, the foot piece and 5" of steel bar are exposed.

Only $24.99 each

Equip Your Jack to Lift Curved Bumpers

The The Hi-Lift Bumper Lift is designed to fit most steel curved bumpers, for quick and easy lifting. The Bumper Lift has a 3,000lb (1361 kg) capacity.

When used with the Hi-Lift Jack — which is not itself designed to be used on curved bumpers — the Bumper Lift makes raising one wheel of most average sized vehicles up to 2" (5 cm) above the ground an easy task.

Never attempt to lift more than one wheel at a time.

Only $24.99 each

Everything You Need to Winch with the Hi-Lift Jack......All in One Convenient Gear Bag!

 

Use the Off-Road Kit to turn your Hi-Lift Jack into an even more versatile tool. This kit keeps all of the needed parts for winching at arms reach.

Off-Road Kit Includes:

• 1 - Winch Tensioner
• 1 - Custom Nose Attachment
• 1 - 8ft. Tree Saver Strap
• 1 - Pair/Hi-Lift Gloves
• Hardware & Gear Bag

Only $69.99 for the compete kit.

Keep your Hi-Lift Jack operating trouble-free. The Fix-It-Kit has the principle parts for servicing all Hi-Lift Jack lifting units.

Kit Includes:

• 2 Climbing Pins
• 2 Climbing Pin Springs
• 2 Cross Pins
• 1 Shear Bolt & Nut
• 1 tube of jack lubricant

  Only $19.99 each